SOLO2.ORG Ultimate Autocross

October 2004 - Posts

• RX7 Cage Install (p2)

  Mark Jeffery's IT RX7 cage bars are all complete and are being welded in. The cage was installed and tacked together for trial fitting. Nothing was finish welded until every piece (except gussets) was fitted. Once the jigsaw puzzel was complete, every Read More... Posted Thursday, October 28, 2004 11:57 AM by Izzy's | 0 Comments Filed under: Project Blog

• RX7 Cage Install

  As of 10/20/04, the Improved Touring RX7 pads are finished and the main structures of the cage, the main hoop and front downbars, are bent and tacked in place! The pads are fairly large and make use of as many vertical and horizontal structural elements Read More... Posted Thursday, October 21, 2004 11:43 AM by Izzy's | 0 Comments Filed under: Project Blog

• RX7 Chassis Prep p2

  All of the RX7's remaining sound proofing and firewall insulation has been removed from inside the cab as well as the underside of the floorpan. While the A/C and blower system were out, the A/C coil was removed for weight savings (per the Improved Touring Read More... Posted Friday, October 15, 2004 3:41 PM by Izzy's | 0 Comments Filed under: Project Blog

• RX7 Chassis Prep

  The chassis prep on the RX7 is going well. I encourage people to do as much prep work as they can to their car so that A) It costs them less as I can get right to the cage, B)Turn-around time will be much quicker C) They can take part in the build of Read More... Posted Tuesday, October 12, 2004 11:28 AM by Izzy's | 0 Comments Filed under: Project Blog

• RX7 Phase 2... New Cage!

  We're excited to be entering phase 2 of Mark Jeffery's RX7 project. In phase 1, we completed the KC Raceware tri-link and ISC Racing Services panhard bar conversion as well as a fuel cell relocation on Mark's current Improved Touring RX7. We also installed Read More... Posted Friday, October 08, 2004 3:01 PM by Izzy's | 0 Comments Filed under: Project Blog